Download Article

Download Article

People take photos in all environments and it is important to make sure yous have the right film selected for your lighting conditions and to make sure the film is loaded properly to ensure that your photos come out. This commodity volition prepare you for an outdoor photography setting, using no flash.

Steps Download Article

  1. i

    Decide upon what lighting weather condition will exist present for desired photography. #*On a sunny day choose a boring pic speed 100ISO or 200ISO

    • Near dawn, dusk, or night clouds choose a faster speed such as 800ISO
    • If y'all will be shooting all 24-hour interval or are unsure of the exact light, cull 400ISO
  2. ii

    Choice-Upwardly your photographic camera and roll of film.

    Advertisement

  3. 3

    Look to the left of the top of the camera.

  4. 4

    Find the round disc that is on top that has an arrow drawn on the disc.

  5. 5

    Await to the left of this round piece.

  6. 6

    Find the modest black knob.

  7. 7

    Slide the knob towards you and equally you lot practice this, pull up on the circular disc.

  8. 8

    Pull gently but firmly up on the disc until you hear the dorsum door of the camera pop open.

    • You lot accept now successfully opened the back of the camera and are ready to load film.
  9. ix

    If you were unable to open the dorsum door, button the circular disc back down and repeat.

  10. 10

    United nations-package your curl of film.

    • In that location should be roughly an inch of film hanging out of the roll of film. This is chosen the leader.
    • If at that place is not a leader, y'all volition need a special tool. Consult your teacher for assistance.
    • If no teacher is bachelor, employ another roll of film.
    • You may presume that the top of the film is the terminate with the circumvolve protruding from the chief cylinder. However, this is not the example; this is actually the bottom.
  11. 11

    Have the whorl of film and lay information technology on pinnacle of the cradle (non in) on the left mitt side. Ensure that the flange out of the gyre of film that has the leader sticking out is to the right over the dorsum of the camera. (It's difficult to mess this up if the curlicue of picture show is oriented properly in the cradle.)

  12. 12

    Pull up on the same disc from before every bit you lot practice this. Button the roll of film downward into the cradle.

  13. 13

    Next, with the coil of film securely in place, pull the leader across the back of the camera past grabbing the sides of the film and so no fingerprints make information technology on the surface of the film.

  14. fourteen

    Once the film has reached the other side of the camera, you must lock the film into the winding machinery and then that the film will motion across the film plane when it is winded after every exposure.

    • On the dorsum of the camera on the right where the tip of the leader is, you will notice two spindles; one with sprockets and another to agree the tip of the leader.
  15. xv

    Insert the leader into one of the ii slits on the right spindle.

    • On the top and lesser of the sprocket, (left) spindle are sprockets, and on the top and bottom of the film in that location are sprocket holes.
  16. 16

    Line up the sprocket holes on the sprockets.

  17. 17

    Holding the film in place on the sprockets and with the leader in a slit on the spindle, with your left hand, find the advancement mechanism which is continued to the right spindle but on peak of the camera and spin it out and to the right with your right thumb. If the advancement mechanism does non movement out, push downwards the shutter release, which is the silverish button to the summit of the advancement mechanism if looking from to a higher place.

    • The spindle will move clockwise, which will appear to be incorrect considering information technology takes the film and bends it around the spindle in what looks to exist backwards. This even so is correct, and the picture is wound on the spindle in this way to ensure it does not slide off.
    • The film should wrap effectually the spindle and motility a brusk distance, once the advancement mechanism stops release the shutter and you will get some other creepo out of information technology.
  18. 18

    Echo previous steps three to 4 times to ensure that the pic is firmly connected to the spindle.

  19. nineteen

    Shut the back door.

  20. xx

    Repeat ii more times.

    • The numbers on the top of the camera should read anywhere from 0 to 3.
  21. 21

    Push down the circular disc on the far left that you lifted upwards originally to load the film.

  22. Advertisement

Add New Question

  • Question

    What practice I do if the lever won't pull back when I get to stage 20?

    Community Answer

    Click the shutter button. The lever will release when the shutter button is pushed.

  • Question

    What practise I exercise if the window shows 36 even later on I loaded new film?

    Community Answer

    Some cameras count down instead of up. The window says you have 36 exposures bachelor, and it should count down with each shoot: 35, 34, 33...

  • Question

    Do I demand to do this in the dark?

    Community Answer

    No. The only fourth dimension the movie needs to be in the dark is when it is being developed. Nevertheless, endeavor non to load your flick in straight sunlight. Load it inside or in a shaded area outdoors.

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertizement

Thanks for submitting a tip for review!

Things You'll Need

  • Camera
  • Pic, which is 35mm

Most This Commodity

Thank you to all authors for creating a page that has been read 187,521 times.

Did this article assistance you?